| Unit of measurement | Freshbox 100 | |||
| Connected air duct size | in | 4” | ||
| Phases | - | 1 | ||
| Minimum supply voltage | V | 110 | ||
| Maximum supply voltage | V | 240 | ||
| Power supply frequency | Hz | 50/60 | ||
| Rated power | W | 12 | 21 | 45 |
| Maximum performance @0.1" | CFM | 18 | 35 | 59 |
| Heat recovery efficiency | % | 98 | 92 | 89 |
| Heat recovery efficiency, max | % | 0 | ||
| Heat exchanger type | - | Counter flow | ||
| Heat exchanger material | - | Polystyrene | ||
| Transported air temperature (max) | °С | 50 | ||
| Transported air temperature (min) | °С | -25 | ||
| Sound pressure level LpA at 10 ft | Sones | 0.25 | 0.5 | 1.75 |
| Name | Photo | Description |
|---|---|---|
| Blauberg HR-S |
|
The humidistat is designed for controlling humidification and/or dehumidification in ventilation, air conditioning and heating systems. Can also be used to alarm when the humidity exceeds or falls below a pre-set level. |
| Blauberg CD-1 |
|
The sensor is designed for indoor carbon dioxide concentration measurement and respective air capacity regulation through the control output signal to the fan. Air capacity control based on CO₂ concentration is an efficient energy saving solution. |
| Blauberg CD-2 |
|
The sensor is designed for indoor carbon dioxide concentration measurement and respective air capacity regulation through the control output signal to the fan. Air capacity control based on CO₂ concentration is an efficient energy saving solution. |
