Blauberg Freshbox 100 ERV

Single-room heat recovery unit
  • Heat exchanger type: Counter flow
  • Heat exchanger material: Enthalpy
  • Supply filter: MERV8 + MERV14 (Option: MERV14 Carbon; HEPA Filter type C)
  • Extract filter: MERV8
  • Sound-insulated casing
  • Enthalpy heat exchanger
  • Control: Built-in control panel
  • Casing material: Coated steel
  • Temperature sensor: Built-in
  • Sound pressure level LpA at 10 ft: 1.75 Sones
Unit of measurement Freshbox 100 ERV
Connected air duct size in 4”
Phases - 1
Minimum supply voltage V 110
Maximum supply voltage V 240
Power supply frequency Hz 50/60
Rated power W 12 21 45
Maximum unit current A 0.4
Max Rated Airflow: CFM @ 0.1 in. w.g. CFM 18 35 59
Rotation speed at 60hz - 2200
Heat recovery efficiency % 96 89 83
Heat exchanger type - Counter flow
Heat exchanger material - Enthalpy
Weight lb 68.5
Supply filter - MERV8 + MERV14 (Option: MERV14 Carbon; HEPA Filter type C), MERV8 + MERV14 (Option: MERV14 Carbon; HEPA Filter type C)
Extract filter - MERV8
Transported air temperature (max) °С 50
Transported air temperature (min) °С -25
Sound pressure level LpA at 10 ft Sones 0.25 0.5 1.75
Datasheet
Freshbox 100 series brochure 2024-07
1.55 Mb
Datasheet
Freshbox 100 specification 2024-07
629 Kb
Datasheet
Freshbox 100 ERV specification 2024-07
627 Kb
Certificates
ETL Certification mark for ERV D, HRV D, Freshbox
149 Kb
Image
Freshbox 100 ERV - image 1
501 Kb
Other accessories
Name Photo Description
Blauberg CD-1 CD-1 The sensor is designed for indoor carbon dioxide concentration measurement and respective air capacity regulation through the control output signal to the fan. Air capacity control based on CO₂ concentration is an efficient energy saving solution.
Blauberg CD-2 CD-2 The sensor is designed for indoor carbon dioxide concentration measurement and respective air capacity regulation through the control output signal to the fan. Air capacity control based on CO₂ concentration is an efficient energy saving solution.
Blauberg HR-S HR-S The humidistat is designed for controlling humidification and/or dehumidification in ventilation, air conditioning and heating systems. Can also be used to alarm when the humidity exceeds or falls below a pre-set level.