Blauberg ERV EC D 150

Series: ERV EC D(R)

Energy Recovery Ventilators are the complete whole house ventilation system designed to bring a continuous supply of fresh air into the house while exhausting an equal amount of stale air

Heat exchanger type: Cross flow
Sound insulation
Motor type: EC
Enthalpy heat exchanger
Casing material: Aluzinc steel

	Unit of measurement	ERV EC D 150
Connected air duct size	in	5”
Minimum supply voltage	V	120
Maximum supply voltage	V	120
Power supply frequency	Hz	60
Rated power	W	186
Minimum performance @0.4"	CFM	162
Maximum performance @0.1"	CFM
Heat exchanger type	-	Cross flow
Heat exchanger material	-	Enthalpy
Extract filter	-
Transported air temperature (max)	°С	55
Transported air temperature (min)	°С	-25
Ambient air temperature min	°С	1
Ambient air temperature max	°С	40
Ambient air humidity max	%	80
Ingress protection rating	-	IP22
Ingress protection rating of the drive	-	IP44

Create PDF

Datasheet

HRV D(R) / ERV D(R) / HRV EC D(R) / ERV EC D(R) series catalog 2024-07

7.2 Mb

Datasheet

ERV EC D 80 specification

564 Kb

Datasheet

ERV EC DR 80 specification

552 Kb

Datasheet

ERV EC D 120 specification

589 Kb

Datasheet

ERV EC DR 120 specification

595 Kb

Datasheet

ERV EC D 150 specification

544 Kb

Datasheet

ERV EC DR 150 specification

760 Kb

Manual

HRV D(R) / ERV D(R) / HRV EC D(R) / ERV EC D(R) series user's manual 2024-06 (BUSA172-3EN-01)

3.52 Mb

Image

ERV EC D 150 - image 1

287 Kb

Other accessories

Name	Photo	Description
Blauberg S52		An electronic wall control timer that is compatible with all HRV D / ERV D models. This control activates the system on three possible modes of operation. The button activates the system to run in intermittent mode for 20/40/60 minutes, it then returns to the predetermined setting. The light indicator of this wall control shows clearly, in which operating mode the unit is.
Blauberg CD-1		The sensor is designed for indoor carbon dioxide concentration measurement and respective air capacity regulation through the control output signal to the fan. Air capacity control based on CO₂ concentration is an efficient energy saving solution.
Blauberg CD-2		The sensor is designed for indoor carbon dioxide concentration measurement and respective air capacity regulation through the control output signal to the fan. Air capacity control based on CO₂ concentration is an efficient energy saving solution.
Blauberg HR-S		The humidistat is designed for controlling humidification and/or dehumidification in ventilation, air conditioning and heating systems. Can also be used to alarm when the humidity exceeds or falls below a pre-set level.
Blauberg CDP-2/5		Wall Speed Controller. Created to optimize both product performance and homeowner comfort. Offers simplified control for ease of use.
Blauberg AC208EM2+LP		Wall Control Panel. Created to optimize both product performance and homeowner comfort. Offers simplified control for ease of use.