| Unit of measurement | ERV EC DR 80 | |
| Connected air duct size | in | 5” |
| Minimum supply voltage | V | 120 |
| Maximum supply voltage | V | 120 |
| Power supply frequency | Hz | 60 |
| Rated power | W | 61 |
| Minimum performance @0.4" | CFM | 61 |
| Heat exchanger type | - | Cross flow |
| Heat exchanger material | - | Enthalpy |
| Weight | lb | 35.3 |
| Transported air temperature (max) | °С | 55 |
| Transported air temperature (min) | °С | -25 |
| Ambient air temperature min | °С | 1 |
| Ambient air temperature max | °С | 40 |
| Ambient air humidity max | % | 80 |
| Ingress protection rating | - | IP22 |
| Ingress protection rating of the drive | - | IP44 |
| Name | Photo | Description |
|---|---|---|
| Blauberg S52 |
|
20/40/60 Push Button Timer |
| Blauberg CDP-3/5 |
|
Wall Speed Controller |
| Blauberg AC208EM2+LP |
|
Wall Control Panel |
| Name | Photo | Description |
|---|---|---|
| Blauberg CD-1 |
|
The sensor is designed for indoor carbon dioxide concentration measurement and respective air capacity regulation through the control output signal to the fan. Air capacity control based on CO₂ concentration is an efficient energy saving solution. |
| Blauberg CD-2 |
|
The sensor is designed for indoor carbon dioxide concentration measurement and respective air capacity regulation through the control output signal to the fan. Air capacity control based on CO₂ concentration is an efficient energy saving solution. |
| Blauberg HR-S |
|
The humidistat is designed for controlling humidification and/or dehumidification in ventilation, air conditioning and heating systems. Can also be used to alarm when the humidity exceeds or falls below a pre-set level. |
